|

engineering plastic

POLYEHTYLENE (PE) 300 HDPE SHEET & ROD

High-Density Polyethylene (HDPE) - a linear polymer, High-Density Polyethylene (HDPE) is prepared from ethylene by a catalytic process. The absence of branching results in a more closely packed structure with a higher density and somewhat higher chemical resistance than LDPE.


More Details...

POLYEHTYLENE (PE)500 HMWPE SHEET&ROD

High molecular weight Polyethylene 500 also known as HMW-PE or PE 500 is thermoplastic with high molecular weight (as determined by viscometric method). Thanks to their high molecular weight, this type of HMW-PE is ideal material for applications requiring excellent sliding properties and wear resistance.


More Details...

POLYEHTYLENE (PE)1000 UHMWPE SHEET & ROD

PE 1000 / PE-UHMW sheets - Antistatic ESD This Polyethylene UHMW material comes with permanent antistatic properties. The electrostatic surface charge is strongly reduced, and a as a result the dust is not attracted and no electrostatic discharge occurs.


More Details...

POLYEHTYLENE (PE)1000 UHMWPE SHEET&ROD RED

PE 1000 / PE-UHMW sheets - Antistatic ESD This Polyethylene UHMW material comes with permanent antistatic properties. The electrostatic surface charge is strongly reduced, and a as a result the dust is not attracted and no electrostatic discharge occurs.


More Details...

TORLON 4301 Sheet&Rod

Torlon® 4301 is a wear-resistant grade of polyamide-imide (PAI) resin. It has a good balance of mechanical properties and wear resistance. It offers high flexural and compressive strength with a low coefficient of friction and outstanding wear resistance at both high velocity and high pressure conditions.


More Details...

SustaPEEK Natural Mod HIGH PERFORMANCE PLASTIC Sheet & Rod

PEEK (Polyetheretherketone) – properties & applications

We process the high performance plastic PEEK (Polyetheretherketone) under the brand name SUSTAPEEK as semi-finished products in the form of sheets, round rods and tubes as well as machined components.


More Details...

NYLON PA6 Sheet&Rod

Polyamide 6 is the most common extruded polyamide and offers a balanced combination of all typical characteristics of this group of materials.


More Details...

TECAPEEK Natural/Black HIGH PERFORMANCE PLASTIC Sheet&Rod

TECAPEEK  PEEK UNFILLED

 

Polyetheretherketone (PEEK) - TECAPEEK is a high performance, high temperature, semi crystalline thermoplastic manufactured by Ensinger and may use Victrex® PEEK 450G or Solvay‘s KetaSpire® KT-820 polymer.


More Details...

TORLON 4203 Sheet & Rod

Torlon® 4203 Sheets Rods.
Torlon polyamide-imide offers excellent compressive strength and the highest elongation of the Torlon® grades. It also provides electrical insulation and exceptional impact strength. This Torlon grade is commonly used for IC Test Sockets & Handlers, as well as, electrical connectors and insulators due to its high dielectric strength.


More Details...

NYLON PA66 Sheet&Rod

SUSTAMID 66 is an extruded general purpose nylon (Polyamide 66). Nylon is one of the original engineering plastics and is still today the material of choice for many bearing and wear applications.


More Details...

EtroX® V PEEK HIGH PERFORMANCE PLASTIC
High-precision: EtroX® V is particularly suitable for machining high-precision test sockets with extremely small boreholes. These have a minimum diameter of up to 0.1 mm and are very well formed with only minimal burr formation


TEFLON Sheet&Rod White

POLYTETRAFLUOROETHYLENE (PTFE/TEFLON)
PTFE, also known as Teflon, is a non-toxic thermoplastic that is being used in many industries. PTFE has one of the lowest frictional coefficients of 0.10 as compared to any other plastic. PTFE also maintain high strength, toughness and flexibility at temperature below zero degree celcius.


More Details...

Ketron PEEK CA30 (30% Carbon)HIGH PERFORMANCE PLASTIC Sheet&Rod

Ketron® CA30 PEEK (30% Carbon Fiber-Reinforced) The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate. It offers designers optimum wear resistance and load carrying capability in a PEEK-based product.


More Details...