ABV Global Holdings Sdn Bhd
109, Lorong IKS Juru 5,
Taman Industri Ringan Juru,
14100 Simpang Ampat,
Pulau Pinang, Malaysia.
+604-5070885
+604-5086885
+604-5087885
+604-5085587

Latest News

POM RED

May 17, 2021
POM RED
View Full Size
POM  is easily machined with excellent dimensional stability for close tolerance parts. A low coefficient of friction and ® excellent wear properties, especially in wet or moist environments, make it easy to see why POM is one of the most widely used engineering thermoplastics available today.

TORLON 5530

May 8, 2021
TORLON 5530
View Full Size
Torlon® 5530 (30% glass-filled polyamide-imide) is Quadrant's compression-molded version of Solvay Torlon 5030 PAI injection-molding resin. The compression-molding process creates a random dispersement of the glass fibres which in-turn allows for tremendous dimensional stability in all directions (as compared to unidirectional glass-fibre flow created through injection-molding and extrusion. In addition to strength and dimensional stability, Torlon® 5530 is electrically insulative with a surface resistivity of > 1013 Ohms/sq. It has exceptional dielectric strength- over 800-volt/ mil. It offers best- in- class radiation resistance, withstanding exposure to 10 x 9th rads*. Close tolerance components are produced from Torlon 5530 including IC Test Sockets, Handlers & Nests welding tip insulators, CVT clutch rollers, fasteners, igniter cups & cases, gears, splines, hydraulic poppets and many other structural and dynamic components.

VESPEL SP1

May 3, 2021
VESPEL SP1
View Full Size
Vespel® SP-1 Rods, Sheets, Plates, Tubes and Parts.
Vespel is a high-performance polyimide material that offers a broad combination of temperature resistance, chemical resistance, mechanical toughness, natural lubricity, wear-resistance & insulation properties.
Vespel SP-1 provides operating temperatures from cryogenic to 300°C (570°F), great plasma resistance, plus a UL rating for minimal electrical and thermal conductivity.

TORLON 4301

Apr 30, 2021
TORLON 4301
View Full Size
Torlon® 4301 Sheets & Rods exhibit excellent wear resistance in bearing grades and is able to endure harsh thermal, chemical and stress conditions. Due to its versatile performance capabilities and proven use in a broad range of applications, Torlon 4301 is a reliable choice.

Letter of Authorized Distributor of ROECHLING Engineering Plastics

Apr 22, 2021
Letter of Authorized Distributor of ROECHLING Engineering Plastics
View Full Size
Letter of Authorized Distributor of ROECHLING Engineering Plastics

PC TUBE

Apr 6, 2021
PC TUBE
View Full Size
Clear polycarbonate tube maintains the clarity and impact strength of polycarbonate sheet in an extruded tube form.


Now available in ABV !! Call 0124056885 for more details ! 

Rolling Pin Roller

Mar 16, 2021
Rolling Pin Roller
View Full Size
We supply custom made for ROLLING PIN ROLLER (FOOD GRADE)

WELDING ROD

Jan 25, 2021
WELDING ROD
View Full Size
They are optimally tailored to the sheet material to be welded, allowing a permanently secure bond to be achieved, and lend themselves very well to processing with all standard thermal welding methods. Please contact us for more details.

PVC CLEAR PIPE SCH 40

Dec 9, 2020
PVC CLEAR PIPE SCH 40
View Full Size

New Stock arrival 

PVC CLEAR PIPE SCH 40 (HERSHEY)

Description:

  • Typical applications include double containment, sight glass and low pressure process piping system

  • Recommended maximum operating temperature : 50oC
  •  

PEEK MOD ESD

Dec 2, 2020
PEEK MOD ESD
View Full Size
SUSTAPEEK MOD is a black colored, self-extinguishing, hardly inflammable, semi-crystalline polyetheretherketone [PEEK] grade reinforced with graphite, PTFE and carbon fibre. Exhibits excellent dimensional stability, extremely low smoke density, very high resistance to high-energy radiation, excellent abrasion resistance and high wear resistance. Has outstanding sliding properties, optimized balance of stiffness, tensile strength & impact strength, extremely high continuous service temperature and low coefficient of linear thermal expansion. Used in teletronics, transportation, medical technology, aerospace industry and chemical engineering e.g. wire & cable insulation, rotor arms, friction discs & seals, shock absorbers, components for analytical equipment, components for dialysis equipment, valve linings and impeller wheels for pumps. Complies with REACH.

PA6-NYLON

Nov 24, 2020
PA6-NYLON
View Full Size

Semi-crystalline thermoplastic

 

Special properties

  • Good toughness
  • Very good noise and vibration absorption
  • Very good sliding properties
  • high absorption of moisture of up to 3 % in standard atmosphere
  • High abrasion resistance
  • high mechanical strength coupled with high impact strength
  • excellent machinability
  • good adhesive properties
  • good weldability

PEEK NATURAL

Nov 20, 2020
PEEK NATURAL
View Full Size
PEEK (Polyetheretherketone) is a semi-crystalline, thermoplastic high-performance material,
and is characterized mainly by its very good mechanical properties and exceptional dimensional stability,
even at high continuous operating temperatures of up to 250°C.
Due to their properties, PEEK plastics are suitable for a wide range of applications with demanding operating conditions

ESD PVC CLEAR

Nov 2, 2020
ESD PVC CLEAR
View Full Size
PVC (polyvinyl chloride) is classified as belonging to the group of amorphous thermoplastics. There is a distinction between PVC-u (unplasticized / without softener) and PVC-p (plasticized / with softener).

Generally, PVC-u, i.e. rigid PVC is used in the production of plastic pipes and profiles as well as plastic sheets. PVC convinces through its high resistance to most acids, plus alcohol, gasoline, lubricants and grease.

ESD PVC, static dissipative PVC, antistatic PVC, conductive PVC

ESLON®-DC ESD PVC has a low flammability rate through a relatively high proportion of chlorine. All ESLON®-DC ESD PVC types comply with the international UL 94 V-0 fire protection classification.

Due to the calendaring production process (pressed sheets), ESLON®-DC ESD PVC sheets feature a higher degree of optical transparency as compared to extruded PVC sheets. Eslon-®-DC ESD PVC plates are especially suited for thermal processing (forming and bending).

ESD PVC, static dissipative PVC, antistatic PVC, conductive PVC


ESLON®-DC ESD PVC is also available in a Hard Coat version, resistant against organic solvents, such as acetone.

ULTEM 1000

Oct 19, 2020
ULTEM 1000
View Full Size
SUSTAPEI (Ultem 1000) is an amorphous polyetherimide and is one of the most commonly used high performance materials. It offers excellent thermal performance and high mechanical strength and stiffness. It is inherently flame retardant, possesses good resistance to acids and is capable of operating continuously in steam ® and hot water. SUSTAPEI is offered in Natural (amber transparent) and Black. SUSTAPEI GF 30 (Ultem 2300) is 30% glass reinforced and provides enhanced stiffness, strength and dimensional stability for more demanding applications.

MC NYLON BLUE

Oct 12, 2020
MC NYLON BLUE
View Full Size
MC cast nylon (BLUE) exhibits all the properties which generally make nylon a superior engineering material: high strength, low friction and wear resistance. However, because of the casting process, part size and thickness are almost unlimited without degradation of the materials internal structure.

TORLON 4203

Oct 9, 2020
TORLON 4203
View Full Size
Torlon® 4203 Rods - Torlon 4203 Sheets. Torlon polyamide-imide offers excellent compressive strength and the highest elongation of the Torlon® grades. It also provides electrical insulation and exceptional impact strength. This Torlon grade is commonly used for IC Test Sockets & Handlers, as well as, electrical connectors and insulators due to its high dielectric strength. Its ability to carry high loads over a broad temperature range makes it good for structural components such as linkages and seal rings. Torlon® 4203 is also an excellent choice for wear applications involving impact loading and abrasive wear. 

SUSTADUR® PET

Oct 7, 2020
SUSTADUR® PET
View Full Size

Sustadur® PET thermoplastic polyester products are semi-crystalline materials that offer good wear resistance along with a combination of excellent thermal stability and chemical resistance.

Sustadur® PET (polyethylene terephthalate) offers higher strength and stiffness over acetal, nylon and PBT. This product has outstanding dimensional stability by virtue of low moisture absorption and a low coefficient of thermal expansion.

PEEK MOD ESD

Oct 6, 2020
PEEK MOD ESD
View Full Size
SUSTAPEEK MOD is a black colored, self-extinguishing, hardly inflammable, semi-crystalline polyetheretherketone [PEEK] grade reinforced with graphite, PTFE and carbon fibre. Exhibits excellent dimensional stability, extremely low smoke density, very high resistance to high-energy radiation, excellent abrasion resistance and high wear resistance. Has outstanding sliding properties, optimized balance of stiffness, tensile strength & impact strength, extremely high continuous service temperature and low coefficient of linear thermal expansion. Used in teletronics, transportation, medical technology, aerospace industry and chemical engineering e.g. wire & cable insulation, rotor arms, friction discs & seals, shock absorbers, components for analytical equipment, components for dialysis equipment, valve linings and impeller wheels for pumps. Complies with REACH.

PE PLATE

Oct 5, 2020
PE PLATE
View Full Size
Polystone® M is a highly versatile polymer that can be designed and formulated to meet your industrial needs. Stocked as sheets, rods,tubes and profiles, it can be machined for your specific application.

Polystone® M Virgin UHMW Ultra High Molecular Weight Polyethylene is an unfilled virgin grade UHMW that is FDA & USDA compliant. Polystone® M Virgin UHMW has outstanding chemical resistance, a very low coefficient of friction, high impact strength and excellent abrasion resistance.

POM/DELRIN

Oct 2, 2020
POM/DELRIN
View Full Size

SUSTARIN C (Acetal) is a general-purpose copolymer acetal that is porosity free. Sustarin® C copolymer has a number of benefits, including strength, tenacity, and toughness in a temperature range of 50-120°C. As a dedicated engineering material, it is now used in applications that were once the domain of metals.

Sustarin® C meets EU and FDA requirements for food contact applications except where foods have 15% or more alcohol content. Due to its highly crystalline nature, Sustarin® C, has excellent machining qualities (especially in wet or moist environments) resulting in close tolerance parts and excellent bright surface finish. Sustarin® C can be used in hot water applications up to 60°C without any hydrolysis effect.


Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start