ABV Global Holdings Sdn Bhd
19, Lorong Perusahaan Ringan Juru 1,
Kawasan Perusahaan Ringan
Juru, 14100 Bukit Tengah,
Penang, Malaysia.
+604-5070885
+604-5086885
+604-5087885
+604-5085587

Latest News

PEEK MOD ESD

Dec 2, 2020
PEEK MOD ESD
View Full Size
SUSTAPEEK MOD is a black colored, self-extinguishing, hardly inflammable, semi-crystalline polyetheretherketone [PEEK] grade reinforced with graphite, PTFE and carbon fibre. Exhibits excellent dimensional stability, extremely low smoke density, very high resistance to high-energy radiation, excellent abrasion resistance and high wear resistance. Has outstanding sliding properties, optimized balance of stiffness, tensile strength & impact strength, extremely high continuous service temperature and low coefficient of linear thermal expansion. Used in teletronics, transportation, medical technology, aerospace industry and chemical engineering e.g. wire & cable insulation, rotor arms, friction discs & seals, shock absorbers, components for analytical equipment, components for dialysis equipment, valve linings and impeller wheels for pumps. Complies with REACH.

PA6-NYLON

Nov 24, 2020
PA6-NYLON
View Full Size

Semi-crystalline thermoplastic

 

Special properties

  • Good toughness
  • Very good noise and vibration absorption
  • Very good sliding properties
  • high absorption of moisture of up to 3 % in standard atmosphere
  • High abrasion resistance
  • high mechanical strength coupled with high impact strength
  • excellent machinability
  • good adhesive properties
  • good weldability

PEEK NATURAL

Nov 20, 2020
PEEK NATURAL
View Full Size
PEEK (Polyetheretherketone) is a semi-crystalline, thermoplastic high-performance material,
and is characterized mainly by its very good mechanical properties and exceptional dimensional stability,
even at high continuous operating temperatures of up to 250°C.
Due to their properties, PEEK plastics are suitable for a wide range of applications with demanding operating conditions

ESD PVC CLEAR

Nov 2, 2020
ESD PVC CLEAR
View Full Size
PVC (polyvinyl chloride) is classified as belonging to the group of amorphous thermoplastics. There is a distinction between PVC-u (unplasticized / without softener) and PVC-p (plasticized / with softener).

Generally, PVC-u, i.e. rigid PVC is used in the production of plastic pipes and profiles as well as plastic sheets. PVC convinces through its high resistance to most acids, plus alcohol, gasoline, lubricants and grease.

ESD PVC, static dissipative PVC, antistatic PVC, conductive PVC

ESLON®-DC ESD PVC has a low flammability rate through a relatively high proportion of chlorine. All ESLON®-DC ESD PVC types comply with the international UL 94 V-0 fire protection classification.

Due to the calendaring production process (pressed sheets), ESLON®-DC ESD PVC sheets feature a higher degree of optical transparency as compared to extruded PVC sheets. Eslon-®-DC ESD PVC plates are especially suited for thermal processing (forming and bending).

ESD PVC, static dissipative PVC, antistatic PVC, conductive PVC


ESLON®-DC ESD PVC is also available in a Hard Coat version, resistant against organic solvents, such as acetone.

ULTEM 1000

Oct 19, 2020
ULTEM 1000
View Full Size
SUSTAPEI (Ultem 1000) is an amorphous polyetherimide and is one of the most commonly used high performance materials. It offers excellent thermal performance and high mechanical strength and stiffness. It is inherently flame retardant, possesses good resistance to acids and is capable of operating continuously in steam ® and hot water. SUSTAPEI is offered in Natural (amber transparent) and Black. SUSTAPEI GF 30 (Ultem 2300) is 30% glass reinforced and provides enhanced stiffness, strength and dimensional stability for more demanding applications.

MC NYLON BLUE

Oct 12, 2020
MC NYLON BLUE
View Full Size
MC cast nylon (BLUE) exhibits all the properties which generally make nylon a superior engineering material: high strength, low friction and wear resistance. However, because of the casting process, part size and thickness are almost unlimited without degradation of the materials internal structure.

TORLON 4203

Oct 9, 2020
TORLON 4203
View Full Size
Torlon® 4203 Rods - Torlon 4203 Sheets. Torlon polyamide-imide offers excellent compressive strength and the highest elongation of the Torlon® grades. It also provides electrical insulation and exceptional impact strength. This Torlon grade is commonly used for IC Test Sockets & Handlers, as well as, electrical connectors and insulators due to its high dielectric strength. Its ability to carry high loads over a broad temperature range makes it good for structural components such as linkages and seal rings. Torlon® 4203 is also an excellent choice for wear applications involving impact loading and abrasive wear. 

SUSTADUR® PET

Oct 7, 2020
SUSTADUR® PET
View Full Size

Sustadur® PET thermoplastic polyester products are semi-crystalline materials that offer good wear resistance along with a combination of excellent thermal stability and chemical resistance.

Sustadur® PET (polyethylene terephthalate) offers higher strength and stiffness over acetal, nylon and PBT. This product has outstanding dimensional stability by virtue of low moisture absorption and a low coefficient of thermal expansion.

PEEK MOD ESD

Oct 6, 2020
PEEK MOD ESD
View Full Size
SUSTAPEEK MOD is a black colored, self-extinguishing, hardly inflammable, semi-crystalline polyetheretherketone [PEEK] grade reinforced with graphite, PTFE and carbon fibre. Exhibits excellent dimensional stability, extremely low smoke density, very high resistance to high-energy radiation, excellent abrasion resistance and high wear resistance. Has outstanding sliding properties, optimized balance of stiffness, tensile strength & impact strength, extremely high continuous service temperature and low coefficient of linear thermal expansion. Used in teletronics, transportation, medical technology, aerospace industry and chemical engineering e.g. wire & cable insulation, rotor arms, friction discs & seals, shock absorbers, components for analytical equipment, components for dialysis equipment, valve linings and impeller wheels for pumps. Complies with REACH.

PE PLATE

Oct 5, 2020
PE PLATE
View Full Size
Polystone® M is a highly versatile polymer that can be designed and formulated to meet your industrial needs. Stocked as sheets, rods,tubes and profiles, it can be machined for your specific application.

Polystone® M Virgin UHMW Ultra High Molecular Weight Polyethylene is an unfilled virgin grade UHMW that is FDA & USDA compliant. Polystone® M Virgin UHMW has outstanding chemical resistance, a very low coefficient of friction, high impact strength and excellent abrasion resistance.

POM/DELRIN

Oct 2, 2020
POM/DELRIN
View Full Size

SUSTARIN C (Acetal) is a general-purpose copolymer acetal that is porosity free. Sustarin® C copolymer has a number of benefits, including strength, tenacity, and toughness in a temperature range of 50-120°C. As a dedicated engineering material, it is now used in applications that were once the domain of metals.

Sustarin® C meets EU and FDA requirements for food contact applications except where foods have 15% or more alcohol content. Due to its highly crystalline nature, Sustarin® C, has excellent machining qualities (especially in wet or moist environments) resulting in close tolerance parts and excellent bright surface finish. Sustarin® C can be used in hot water applications up to 60°C without any hydrolysis effect.

NYLON-PA 66

Oct 1, 2020
NYLON-PA 66
View Full Size
SUSTAMID 66 is an extruded general purpose nylon (Polyamide 66). Nylon is one of the original engineering plastics and is still today the material of choice for many bearing and wear applications. Due to its unique combination of physical properties such as toughness, abrasion resistance, chemical resistance and light weight, SUSTAMID 66 is regularly machined into parts to replace bronze, brass, steel and aluminum. SUSTAMID 66 MoS is enhanced with molybdenum 2 disulfide and provides a lower coefficient of friction and improved wear resistance. SUSTAMID 66 GF 30 is reinforced with 30% glass fibers and offers higher tensile strength, flexural strength and superior abrasion resistance.

PVDF

Sep 30, 2020
PVDF
View Full Size

Polystone® PVDF is a vinylidene-fluoride-based polymerisate outstanding for its excellent chemical resistance, excellent machinability and universal applicability. Because of its special properties Polystone® PVDF is especially suited for applications in the chemical industry. Its high purity makes it the ideal material for the semiconductor industry.

Polystone® PVDF meets the requirements of the FM-Test 4910 (Factory Mutual Research Specification Test) and is thus an approved material for use in semiconductor and clean room technology.

PE 1000 ESD BLACK

Sep 28, 2020
PE 1000 ESD BLACK
View Full Size
Polystone® M material with a permanent antistatic action. The electrostatic surface charge is reduced, dust is not attracted and no electrostatic discharge occurs.

EtroX® V

Sep 18, 2020
EtroX® V
View Full Size
High-precision: EtroX® V is particularly suitable for machining high-precision test sockets with extremely small boreholes. These have a minimum diameter of up to 0.1 mm and are very well formed with only minimal burr formation.

DUROSTONE

Sep 8, 2020
DUROSTONE
View Full Size

Durostone® PCB Solder Pallet Materials

Durostone® materials have been developed for all procedures within the PCB assembly process. There are three main grades which are suitable for use in the SMT reflow and wave soldering processes, Durostone® CHP760, CAS761 & CAG762.

 

These materials offer the following features:

  • Excellent mechanical properties at elevated temperatures including the lead-free process.
  • Low thermal conductivity.
  • Excellent machining properties enabling the manufacture of complex design solder pallets.
  • Good resistance to chemicals used in modern fluxes.

Glastherm

Sep 4, 2020
Glastherm
View Full Size
Plant components often need to be thermally insulated for operational or economic reasons. Our Glastherm® heat insulation systems are specially designed for this purpose. The glass-fibre reinforced composite material is extremely strong, resistant to high temperatures and boasts a long service life. Given these exceptional properties, Glastherm® is advantageous in terms of economic efficiency and process engineering.

Durostone WGR 781

Sep 3, 2020
Durostone WGR 781
View Full Size
Durostone® WGR781 is a woven glass laminate which has been specially formulated to withstand extreme temperatures and aggressive fluxes. Fluxes containing halides or halogen activators can reduce a material´s lifespan, but Durostone® WGR781 can run many thousands of cycles without any adverse effect. The woven glass reinforcement ensures that the flux does not penetrate the solder pallet surface and expose fibres.
The resin used to produce Durostone® WGR781 can operate at a continous temperature of 280°C without degradation. The material also displays excellent mechanically properties and provides the necessary dimensional stability at elevated temperatures in the wave soldering process. Durostone® WGR781 has excellent machining properties, with walls of just 0.50 mm thick possible.

Glastic® UTR (GPO-3)

Aug 19, 2020
Glastic® UTR (GPO-3)
View Full Size
Glastic® UTR (GPO-3) is one of our Glastic® laminates and offers a superior combination of electrical and mechanical properties. Made from fiberglass-reinforced thermoset polyester resins, these UL®-recognized sheets blend excellent performance characteristics with economy.

PE NATURAL

Jul 27, 2020
PE NATURAL
View Full Size
Polystone® D (PE NATURAL) is available for many different applications, particularly in mechanical engineering and the foodstuffs industry.

 

Special properties

  • Good mechanical properties
  •  
  • Very wear, cutting and scratch resistant
  •  
  • Physiologically safe

Typical areas of application

  • Environment and disposal technology
  •  
  • Lining technology
  •  
  • Cutting boards

Type of product

  • compression moulded sheets
  •  
  • extruded sheets


We have stock from Thk 1mm until Thk 120mm, welcome to inquiry.

Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start